Removing Drivelock Protection; Device Security - HP Pavilion DV5000 User Manual

Removing DriveLock protection

To remove a DriveLock password:
1. Open the Setup Utility by turning on or restarting the computer, and then pressing
setup message is displayed in the lower-left corner of the screen.
2. Use the arrow keys to select one of the following options:
●
If the computer has one hard drive, select Security > DriveLock Password, and then
press enter. (This option is called Primary DriveLock Password on models with two hard
drives.)
– or –
●
If you want to remove the DriveLock protection on the secondary hard drive (select models
only), select Security > Secondary DriveLock Password, and then press enter.
3. Type your current password in the Enter Current Password field, and then press
(Pressing
changing, your password.)
4. When the setup notice message is displayed, press
5. To save your preferences and exit the Setup Utility, press f10, and then follow the instructions
on the screen.
Your preferences go into effect when the computer restarts.

Device security

From the Device Security menu in the Setup Utility, you can disable or enable a system device, such
as an optical drive.
To disable or enable system devices:
1. Open the Setup Utility by turning on or restarting the computer, and then pressing
setup message is displayed in the lower-left corner of the screen.
2. Use the arrow keys to select Security > Device Security, and then press enter.
3. Use the arrow keys to select a device. Then
●
To disable a device, press
press enter.
●
To enable a device, press
press enter.
4. When a confirmation prompt with your selection is displayed, press enter.
5. To save your preferences and exit the Setup Utility, press f10, and then follow the instructions
on the screen.
Your preferences go into effect when the computer restarts.
140 Chapter 11 Security
enter at each of the remaining password fields indicates that you are removing, not
f5
f5
enter
or f6 to change the field for the device to Disable, and then
or f6 to change the field for the device to Enable, and then
to save your changes.
f10 while the
enter 3 times.
f10 while the
ENWW