Closing The Setup Utility - HP Pavilion DV4000 Hardware And Software Manual

The "<F12> to boot from LAN" message that is displayed in the
lower-left corner of the screen each time the notebook is started
or restarted in Windows or restored from hibernation is the
prompt for a Network Service Boot.
The "Press <ESC> to change boot order" message that is
displayed in the lower-left corner of the screen each time the
notebook is started or restarted in Windows or restored from
hibernation is the prompt to change the boot order.

Closing the Setup Utility

You can close the Setup utility with or without saving changes.
To close the Setup utility and save your changes from the
current session, use either of the following procedures:
– or –
When you use the
to return to the Setup utility. When you use the Exit Saving
Changes procedure, the Setup utility closes when you
press
To close the Setup utility without saving your changes from
the current session:
If the Setup utility menus are not visible, press
to the menu display. Then use arrow keys to select the
Exit menu > Exit Discarding Changes, and then press
After the Setup utility closes, the notebook restarts in Windows.
Hardware and Software Guide
Press and then follow the instructions on the screen.
f10,
If the Setup utility menus are not visible, press
return to the menu display. Then use arrow keys to select
the Exit menu > Exit Saving Changes, and then press
enter.
enter.
procedure, you are offered an option
f10
Setup Utility
to
esc
to return
esc
enter.
13–5