Specifications; General Safety - GMC GID18 Manual

Specification
Impact Driver:
Model number
Technology
No load speed
Compatible bits
Weight
GB
Battery:
Cell type
Voltage
Capacity
Charger:
Input power
Output power
Charging time:
Cable length
Ingress protection
Protection class
Sound and vibration information:
Sound pressure L
PA
Sound power L
WA
Uncertainty K
Weighted vibration a
h
Uncertainty K
As part of our ongoing product development, specifications of GMC products
may alter without notice.
The sound intensity level for the operator may exceed 85dB(A) and sound
protection measures are necessary.
GID18
18V, Li-Ion
0 – 2000min
-1
6mm (1/4") impact driver hex bits
1.5kg
Li-Ion
18V, DC
1.5Ah
230-240V~ 50/60Hz, 40W
14.4-18V DC, 1500mA
1hr
2m
IPX0
84.13dB(A)
95.13dB(A)
3dB
3.045m/s 2
1.5m/s
2
WARNING: Always wear ear protection where the sound level exceeds 85dB(A)
and limit the time of exposure if necessary. If sound levels are uncomfortable,
even with ear protection, stop using the tool immediately and check the ear
protection is correctly fitted and provides the correct level of sound attenuation
for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch,
numbness, tingling and reduced ability to grip. Long term exposure can lead to a
chronic condition. If necessary, limit the length of time exposed to vibration and
use anti-vibration gloves. Do not operate the tool with hands below a normal
comfortable temperature, as vibration will have a greater effect. Use the figures
provided in the specification relating to vibration to calculate the duration and
frequency of operating the tool.
Sound and vibration levels in the specification are determined according to
EN60745 or similar international standards. The figures represent normal
use for the tool in normal working conditions. A poorly maintained, incorrectly
assembled, or misused tool, may produce increased levels of noise and
vibration. www.osha.europa.eu provides information on sound and vibration
levels in the workplace that may be useful to domestic users who use tools for
long periods of time.

General Safety

WARNING Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
WARNING: This appliance is not intended for use by persons
(including children) with reduced, physical or mental
capabilities or lack of experience or knowledge unless they
have been given supervision or instruction concerning use
of the appliance by a person responsible for their safety.
Children must be supervised to ensure that they do not play with the
appliance.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power
tool. Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
6