Specifications; Functional Description - Chicago Pneumatic Impact Wrench CP8750 Operator's Manual

1. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord.
Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
2. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free
replacement.
3. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in
a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic
particles.
Symbology
Double Insulated
Volts Alternating
Direct Current
Amps
Impacts per Minute Under Load
(IPM)
Underwriters Laboratories, Inc.
Canadian Standards Association
1. Drive shank
2. Rocker switch
3. Cord
SPECIFIC SAFETY RULES - IMPACT WRENCH
Catalog
No.
Current/
CP8750

FUNCTIONAL DESCRIPTION

1

Specifications

No Load
Amps RPM
Volts
120 AC/DC 7 1800
2
3
Drive
Impacts Per
Shank Minute
1/2" 2600
NEW PHOTO
NEEDED
Average
Torque
Output
300 ft-lbs.
page 3