Antenna Patterns In The Fcc Frequency Band - Siemens SIMATIC RF610T ATEX System Manual

Hide thumbs Also See for SIMATIC RF610T ATEX:
Table of Contents

Advertisement

6 6 .6.6.2

Antenna patterns in the FCC frequency band

Directional radiation pattern FCC
The directional radiation pattern is shown for nominal alignment and a center frequency of
915 MHz.
Figure 6-44
Reference system
The half-power beam width of the antenna is defined by the angle between the two -3 dB
points (corresponding to half the power in relation to the maximum power). Which range (in
%) corresponds to the dB values in the patterns can be obtained from this table (Page 321).
Note that the measurements presented graphically below were carried out in a low-reflection
environment. Deviations can therefore occur in a normally reflecting environment.
SIMATIC RF600
System Manual, 06/2019, J31069-D0171-U001-A22-7618
Antennas
6.6 SIMATIC RF650A
319

Advertisement

Table of Contents
loading

This manual is also suitable for:

6gt2810-2bb80-0ax1

Table of Contents