Introduction For Buttons On Remote Controller - Boreal Brisa BRS12HPL1IA Owner's Manual

Introduction for buttons on remote controller

Note:
● This is a general use remote controller, it could be used for the air conditioners
with multifunction; For some function, which the model doesn't have, if press
the corresponding button on the remote controller that the unit will keep the
original running status.
● After putting through the power, the air conditioner will give out a sound.
Operation indicator "
models). After that, you can operate the air conditioner by using remote controller.
● Under on status, pressing the button on the remote controller, the signal icon "
on the display of remote controller will blink once and the air conditioner will give
out a "de" sound, which means the signal has been sent to the air conditioner.
1
ON/OFF button
Press this button to turn on the unit. Press this button again to turn off the unit.
2
MODE button
Press this button to select your required operation mode.
● When selecting auto mode, air conditioner will operate automatically according
to ex-factory setting. Set temperature can't be adjusted and will not be displayed
as well. Press "FAN" button can adjust fan speed. Press "
adjust fan blowing angle.
● After selecting cool mode, air conditioner will operate under cool mode. Cool
indicator " " on indoor unit is ON. (This indicator is not available for some mod-
els.) Press "▲" or "
adjust fan speed. Press "
●
When selecting dry mode, the air conditioner operates at low speed under dry
mode. Dry indicator "
some models.) Under dry mode, fan speed can't be adjusted. Press "
button to adjust fan blowing angle.
● When selecting fan mode, the air conditioner will only blow fan, no cooling and
no heating. All indicators are OFF. Press "FAN" button to adjust fan speed. Press
" " / " " button to adjust fan blowing angle.
●
When selecting heating mode, the air conditioner operates under heat mode.
Heat indicator "
models.) Press "▲" or "
to adjust fan speed. Press "
only unit won't receive heating mode signal. If setting heat mode with remote
controller, press ON/OFF button can't start up the unit).
" is ON (red indicator, the colour is different for different
AUTO COOL
" button to adjust set temperature. Press "FAN" button to
" / "
" on indoor unit is ON. (This indicator is not available for
" on indoor unit is ON. (This indicator is not available for some
" button to adjust set temperature. Press "FAN" button
" / "
DRY FAN
" button to adjust fan blowing angle.
" button to adjust fan blowing angle. (Cooling
12
HEAT
" / " " button can
"
" / " "