HP OmniBook 6100 Information page 3

If you have trouble setting up or using a wireless LAN connection, see the information about wireless LAN
in c:\hp\Drivers\Wireless\Readme.txt.
Using an External Monitor
If you connect an external monitor to the computer, you can turn on both displays (internal and external) by
pressing Fn+F5 one or more times. If the image on the external monitor is offset to one side when both
displays are on, use the controls on the monitor to center the image.
You should avoid pressing Fn+F5 while graphic-intensive applications are running, such as OpenGL
applications. In some situations, switching displays can cause video corruption or application shutdown.
Removing the Hard Disk Drive
To remove the hard disk drive from the computer, you must remove three screws on the bottom of the
computer. One screw holds the cover, and two additional screws hold it through the bottom casing.
Playing DVD Movies
* The DVD player must be set to the region code used by DVD movies in your region of the world in order
to play movies. When you insert a DVD movie, the software detects the region code and asks you to set
your code. If you make a mistake, you can change the code only four times--then it is permanently locked
in the drive. Note: If you lock your DVD drive on a region code you do not want, the drive replacement is
not covered under your warranty, and you will be responsible for replacement or repair charges.
* When playing DVD movies on battery power, you should make sure your processor runs at optimum
speed for movies. In Windows 98 or 2000, set the SpeedStep setting to Max Performance. In Windows
XP, use Power Options in Control Panel to select the Portable/Laptop power scheme.
Using a TV as a Monitor
If you attach a TV to the S-video port and part of your Windows desktop extends beyond the edges of the
TV screen, try reducing the size of your desktop to 1024 x 768 resolution or lower. The TV may not be able
to display higher resolutions.
Using AOL 5.0 Software
AOL software version 5.0 automatically detects your modem and changes settings accordingly. However, if
your computer has an Ambit/ESS modem, the ESS generic modem settings may prevent the modem from
connecting at higher speeds. To change the settings, use the AOL software to open the Sign On screen, then
click Setup, Expert Setup. On the Devices tab, select the ESS modem and click Edit, then change the
modem to Hayes Compatible.
Using a CD-RW Module with a Docking System
If you use a CD-RW drive module in your notebook computer and in a docking system, you should
recalibrate the drive each time you move it, especially if you will be writing CDs. Use the CD-RW software
and a clean commercial CD for the calibration.