LG WF-DT90VW Owner's Manual page 42

Table of Contents

Advertisement

TROUBLESHOOTING
42
Symptoms
Excess static in clothes
after drying.
Clothes have damp
spots after a Sensor
Dry programme.
Clothes have dried for too long (overdried).
• Overdrying a load of clothes can cause a buildup of static electricity. Adjust
settings and use a shorter drying time, or use Sensor Dry programmes.
Drying synthetics, permanent press, or synthetic blends.
• These fabrics are naturally more prone to static buildup. Try using fabric
softener, or use shorter Timed Drying time settings.
Very large load or very small load. Single large item such as a blanket or
comforter.
• If items are too tightly packed or too sparse the sensor may have trouble
reading the dryness level of the load. Use a Timed Drying programme for
very small loads.
• Large, bulky items such as blankets or comforters can sometimes wrap
themselves into a tight ball of fabric. The outside layers will dry and
register on the sensors, while the inner core remains damp. When drying
a single bulky item, it may help to pause the cycle once or twice and
rearrange the item to unwrap and expose any damp areas.
• To dry a few remaining damp items from a very large load or a few damp
spots on a large item after a Sensor Dry programme has completed, empty
the lint filter, then set a Timed Drying programme to finish drying the
item(s).
Possible Cause & Solution

Advertisement

Table of Contents
loading

Table of Contents