Dvd Drive Problems; Battery Problems - HP OmniBook 3100 User Manual

Hp omnibook plug-in modules
Hide thumbs Also See for OmniBook 3100:
Table of Contents

Advertisement

DVD Drive Problems

If the DVD drive stops responding
Remove and reinsert the DVD.
Reset the OmniBook.
If resetting the OmniBook does not solve the problem, remove and reinsert the
DVD module.

Battery problems

If the OmniBook doesn't turn on with a fresh battery
The new battery pack may be low. Plug in the ac adapter.
If nothing happens, press the blue power button for four seconds, then wait 10
seconds and press the power button again.
If the battery pack doesn't charge or stops charging
Check that the battery is fully installed and locked in place with the safety latch.
Shut down the OmniBook and remove the battery, then check that the battery
contacts are clean. Make sure that the ac adapter cables are fully plugged in.
Move the OmniBook away from any nearby heat source. Unplug the ac adapter
and allow the battery to cool down. An elevated battery temperature prevents
charging.
If the battery runs down too fast
If the operating time has gotten shorter and the battery pack is more than a year
or two old, you may need a new battery.
Troubleshooting
1-23

Advertisement

Table of Contents
loading

Table of Contents