Table of Contents
Advertisement
Operation Manual / TPL67-C.. - TPL71-C..
8 Disassembly and assembly / 8.7 Installing cartridge group
© Copyright 2018 . All rights reserved.
Measure and note the axial clearance (A) (see the section on axial
u
clearance).
CAUTION
If the axial clearance (A) is out of tolerance, an ABB Turbocharger ser-
vice station must be contacted.
Connect oil pipes and all air lines in accordance with enginebuilder
u
specifications.
Version with compressor wheel cooling system
Fit the air supply line. (See also chapter entitled Preliminary remarks /
u
Layout and functionality)
Fit the filter silencer or air suction branch.
u
Fit the insulation.
u
HZTL2488_EN
Revision E
August 2018
Advertisement
Table of Contents
