Flash Furniture NH-WT-2448BSP-GG Assembly Instructions

ASSEMBLY INSTRUCTIONS
Before You Begin:
Please identify all component parts and hardware pieces required before you begin. Carefully remove all of the
components from the packaging and set aside for assembly. Assemble on a soft surface to prevent scratching
during assembly.
Caution:
Tighten all components securely before use. Failure to do so may result in personal injury.
DO NOT use any sharp objects to open plastic wrapped components as damage to product or components
may result.
Warning:
CHOKING HAZARD - Small Parts. Adult Assembly Required.
Injury may result from tipping furniture. You must install the Tipping Restraint Hardware with the unit to prevent the unit
from tipping and causing any accidental injury, instability, death or damage. The tipping restraint is intended only as a
safety measure, it is not a substitute for proper adult supervision.
This tipping restraint is not an earthquake restraint. If you wish to add the extra security of earthquake restraints, they
must be purchased and installed separately.
Serious or fatal crushing injuries can occur from furniture tipping over. To prevent furniture from tipping over it must be
permanently fixed to the wall. Fixing devices for the wall are not included since different wall materials require different
types of fixing devices. Use fixing devices suitable for the walls in your home.
Failure to detach this restraint before moving furniture may result in injury or damage.
DO NOT ALLOW CHILDREN TO CLIMB ON FURNITURE
Online Assembly Instructions:
Customer Service email:
NH-WT-2448-GG / NH-WT-2460-GG / NH-WT-3072-GG / NH-WT-2448BSP-GG / NH-WT-2460BSP-GG / NH-WT-3072BSP-GG
http://ftp.flashfurniture.com/AssemblyInstructions/NH-WT-2448BSP-GG.pdf
CustomerExperience@belnickinc.com
Thank you for your purchase!
Stainless Steel
Work Table
| Phone: 866-552-2810