Operation - Bond HYUTT15002-1 Manual

OPERATION

Before performing a leak test, be sure that no sparks can occur and you are in a spacious outdoor
area. Connect the propane gas tank to the regulator and turn the valve on the unit to the 'OFF'
position. Brush a soap and water mixture on all connections. Turn the gas supply on; if bubbles
occur on any connection there may be a leak. If you smell gas or a leak is discovered turn the
gas valve off, disconnect propane gas tank and do not use the appliance until the leak is
repaired.
Pumice stones/lava rocks/LavaGlass
of lighting this unit; stand away from the unit for the first 20 minutes after igniting. Flame height
should be a yellow/blue color between 1 - 7.5 inches in height.
Wait 50 minutes after extinguishing flame prior to placing a lid (if applicable) or protective cover on
heating item.
To Light
1. After assembling the gas tank, push and turn the control knob (D) counter-clockwise, then use a
2.
To Extinguish
1 . Turn the control knob (D) clockwise to the 'OFF' position.
2 . Disconnect propane cylinder to close the gas supply if not using for a period of time.
Bond Manufacturing Co., Inc. | Page 8
could pop up and strike somebody's face during the process
Keep holding down the control knob for 15 seconds.
D