Switching The Water Filter Counter On And Off; Dispenser Light; Motion Sensor; Theater Mode - Thermador Freedom THREFR633 Use & Care Manual

Switching on Pull-to-open system
In an installation situation with handles you can
select the Pull-to-open system. Your appliance will
support you in opening the door as soon as you pull
on the handle.
Open menu item Aut. door opening.
1.
Select menu item Pull-to-open system.
2.
Press 8 button to open the menu item.
3.
Select menu item Opening force. Here you can
4.
select the level of force required to activate
automatic door opening.
Switching off automatic door opening
Open menu item Aut. door opening.
1.
Select menu item Off.
2.
Press 8 button.
3.
The setting is saved.
Switching the water filter counter on and
off
If you have replaced the water filter with a particle
filter, switch the water filter counter off. It is not
needed in this case as the particle filter does not
have to be replaced.
Press " button to open the Settings menu.
1.
Scroll to the left to the Appliance settings menu.
2.
Press 8 button.
3.
Press > button to move to the menu item Water
4.
filter counter.
To change the setting, press " button.
5.

Dispenser light

Use this function to set how long the light will
illuminate the ice and water dispenser.
Adjusting dispenser light
Press " button to open the Settings menu.
1.
Press < button to move to the menu item
2.
Appliance settings.
Press 8 button to open the menu item.
3.
Press > button to move to the menu item
4.
Dispenser light.
Press " button to open the menu item.
5.
Press > button to select the required duration.
6.
Press 8 button.
7.
The setting is saved.
Press ; button to exit the menu.
8.
Operating the appliance en-us

Motion sensor

When the motion sensor is switched on, the ice and
water dispenser light automatically switches on as
soon as a glass is held underneath.
Switching motion sensor on or off
Press " button to open the Settings menu.
1.
Press < button to move to the menu item
2.
Appliance settings.
Press 8 button to open the menu item.
3.
Press > button to move to the menu item Motion
4.
sensor.
Press " button to open the menu item.
5.
Use the > button to move to the menu item On or
6.
Off.
Press 8 button.
7.
The setting is saved.
Press ; button to exit the menu.
8.

Theater mode

If Theater mode is switched on, the light will slowly
become brighter when the appliance is opened, and
then slowly darker when it is closed.
Switching Theater mode on or off
Press " button to open the Settings menu.
1.
Press < button to move to the menu item
2.
Appliance settings.
Press 8 button to open the menu item.
3.
Use > button to move to the menu item Theater
4.
mode.
Press " button to open the menu item.
5.
Use > button to move to the menu item On or Off.
6.
Press 8 button.
7.
The setting is saved.
Press ; button to exit the menu.
8.

Resetting to the factory settings

Press " button to open the Settings menu.
1.
Press < button to move to the menu item
2.
Appliance settings.
Press 8 button.
3.
Use < button to move to the menu item Factory
4.
settings.
Press " button.
5.
A signal tone sounds, and a message to confirm
reset appears.
Press 8 button.
6.
All settings are reset to the factory settings.
Press ; button to exit the menu.
7.
17