Daily Use - Washing Only - AEG L7WEE852 User Manual

28 www.aeg.com
• The appliance has a malfunction
(sequence of short sounds for about 5
minutes).
To deactivate/activate the acoustic
signals when the programme is
completed, touch the Manchas/Pre-Lav.
and the Inicio diferido buttons
simultaneously for about 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
11.3 Permanent Extra Rinse
With this option you can permanently
have one or two extra rinses when you
set a new programme.

12. DAILY USE - WASHING ONLY

WARNING!
Refer to Safety chapters.
12.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press the On/Off button for a few
seconds to activate the appliance.
The indicator of the Inicio/Pausa
button starts flashing.
The programme dial is automatically set
on default programme and only the
indicator Lavar is on above the Lavar +
Secar button.
The display shows the maximum load,
the default temperature, the maximum
spin speed, the indicators of the phases
making up the programme and the cycle
duration.
12.2 Loading the laundry
1. Open the appliance door.
2. Shake the items before you put them
in the appliance.
3. Put the laundry in the drum, one item
at a time.
Make sure not to put too much laundry in
the drum.
4. Close the door firmly.
• Simultaneously touch the Temp. °C
button and the Centrif. button once to
add one extra rinse.
the display.
• Simultaneously touch the Temp. °C
button and the Centrif. button twice to
add two extra rinses.
the display.
• Simultaneously touch the Temp. °C
button and the Centrif. button three
times to remove extra rinses. The
display only shows
CAUTION!
Make sure that no laundry
stays between the seal and
the door. There is a risk of
water leakage or damage to
the laundry.
CAUTION!
Washing heavily oiled,
greasy stains could cause
damage rubber parts of the
washing machine.
appears on
appears on
.