Table of Contents
Advertisement
System
Picture
Input
Color
Auto Source
Audio
DP Format
Gaming
Wide Mode
PIP/PBP
OSD
Hot Key Assignment
System
DDC/CI
HDMI Black Level
Move
Enter
Picture
Quick Start Mode
Color
Audio
Gaming
OSD
System
Move
Enter
1.
Press the MENU key to open the OSD.
2.
Toggle the joystick to the up or down to select System from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3.
Toggle to the left or right to control functions.
4.
Input: Select the source from HDMI 1(2.0), HDMI 2(2.0), DP.
5.
Auto Source: The default is "On", which can support auto search for signal source in
order.
Note: Surround application must set Auto Source is "Off".
6.
DP Format: Default is DP1.2, can selection support DP1.1,1 or DP1.2 format.
7.
Wide mode: You can select which screen aspect you are using. The options are
Aspect, Full and 1:1.
8.
PIP/PBP settings
-----------------------------------------------------------------------------------------------------------
Note:
1. PIP/PBP function does not support HDMI 1 and HDMI 2 simultaneously.
2. Under PIP & PBP mode, "Auto search" function is unavailable. The PIP/PBP
signal source needs to be selected manually.
HDMI 1
HDMI 2
DP
Mode - Standard
HDMI
On
DP 1.2
Full
On
Normal
Quick Start Mode
Mode - Standard
Off
HDMI 1
X
X
PIP/PBP & Input status
HDMI 2
--
X
O
X
--
O
DP
O
O
--
Advertisement
Table of Contents
