Page 2
Serial number: ___________________________________ Date of purchase: ________________________________ Place of purchase: ________________________________ Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies’ product names or trademarks are used herein for identification purposes only and belong to their respective companies.
Information for your safety and comfort Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Special notes on LCD monitors The following are normal with the LCD monitor and do not indicate a problem. •...
Accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power from the equipment, be sure to unplug the power cord from the electrical outlet. Safe listening To protect your hearing, follow these instructions.
• If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.
We at Acer are very conscious of the environmental effects of our business and strive to identify and provide the best working procedures to reduce the environmental impact of our products.
LCD pixel statement The LCD unit is produced with high-precision manufacturing techniques. Nevertheless, some pixels may occasionally misfire or appear as black or red dots. This has no effect on the recorded image and does not constitute a malfunction. This product has been shipped enabled for power management: •...
Taking care of your vision Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room lighting, poorly focused screens, very small typefaces and low-contrast displays could stress your eyes. The following sections provide suggestions on how to reduce eyestrain. Eyes •...
Page 9
(“x” = 0~9, a ~ z, A ~ Z, or blank) We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislations as below Directive and following harmonized...
Acer America Corporation 333 West San Carlos St., San Jose Suite 1500 CA 95110, U. S. A. Tel : 254-298-4000 Fax : 254-298-4147 www.acer.com Federal Communications Commission Supplier's Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following...
Information for your safety and comfort Safety instructions Special notes on LCD monitors Cleaning your monitor Accessibility Safe listening Warnings Using electrical power Product servicing Potentially explosive environments Additional safety information IT Equipment Recycling Information Disposal instructions LCD pixel statement Tips and information for comfortable use Finding your comfort zone Taking care of your vision...
Please check that the following items are present when you unpack the box, and save the packing materials in case you need to ship or transport the monitor in the future. LCD monitor Quick start guide AC Power cord LCD Monitor NITRO XV0 Series/XV270U USER GUIDE DP Cable HDMI2.0 cable (Optional)
SCREEN POSITION ADJUSTMENT In oder to optimize the best viewing position, you can adjust the height/tilt of the monitor. • Height Adjustment After pressing the top of the monitor then you can adjust the height of the monitor. 120mm • Tilt Please see the illustration below for an example of the tilt range.
Page 14
• Swivel With the built-in pedestal, you can swivel the monitor for the most comfortable viewing angle. 360° • Monitor Pivot Before rotating the display,lift it to the top position and then push it back to the utmost degree. Rotate clockwise or counter-clockwise until the monitor stops at ±90°.
Connecting the AC Power cord • Check first to make sure that the power cord you use is the correct type required for your area. • The monitor has a universal power supply that allows operation in either 100/120 V AC or 220/240 V AC voltage area.
Display Data Channel (DDC) To make installation easier, so long as your system supports the DDC protocol, the monitor is able to plug-and-play. The DDC is a communication protocol through which the monitor automatically informs the host system about its capabilities; for example, supported resolutions and corresponding timing.
Installation Turn off your computer and unplug your computer's power cord. Connect the signal cable to the HDMI2.0 (optional) and /or DP (optional) input socket of the monitor, and the HDMI2.0 (optional) and /or DP (optional) output socket of the graphics card on the computer. Insert the monitor power cable into the power port at the back of the monitor.
User Controls External controls Power button Turns the monitor on/off.Blue indicates power on. Amber indicates standby/ power saving mode. Function key Press to view Main page. Press again to enter hotkey1 function. When the Function Menu is active, press this key to view the basic information for your monitor and current input or reset the custom color settings to the factory defaults.
Page 21
Using the Shortcut Menu ------------------------------------------------------------------------------------------------------------- Note: The following content is for general reference only. Actual product specifications may vary. The OSD (onscreen display) can be used to adjust the settings of your LCD monitor. Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality, OSD position and general settings.
Page 22
Selecting the input Open the Input control and select HDMI 1(2.0), HDMI 2(2.0), DP or Auto Source. When you are done, press the joystick to exit current page and store. Input Input HDMI Auto Source Move Exit Main menu 1. Press the MENU key to open the OSD. 2.
Page 23
Contrast: Adjust the contrast from 0 to 100. ----------------------------------------------------------------------------------------------------------- Note: Sets the degree of difference between light and dark areas. Black Boost: Adjust the black level from 0 to 10. Enhances shadows by increasing the brightness without changing lighter shades. Blue Light: Filters out blue light to protect your eyes by adjusting how much blue light is shown -- 80%, 70%, 60%, or 50%.
Page 24
Color Mode - Stamdard Picture Gamma Color Color Temp. Warm Audio R Gain Gaming G Gain B Gain System R Bias G Bias B Bias Move Enter Mode - Stamdard Picture Modes Color sRGB Mode Off Grayscale Mode Off Audio Gaming 6-axis Hue 6-axis Saturate...
Page 25
Audio Mode - Stardard Picture Volume Color Mute Off Audio Gaming System Move Enter Press the MENU key to open the OSD. Toggle the joystick to the up or down to select Audio from the OSD.Then toggle to the right to navigate to the element you wish to adjust and press the joystick to enter it. Toggle to the left or right to adjust the sliding scales.
Page 26
--------------------------------------------------------------------------------------------------------- Note: 1. HDR setting: "Auto" is not support VRB. 2. VRB set "On", when to turn on FreeSync, will auto set VRB is "Off". 3. VRB set "On", when to adjustment (Brightness, Blue Light, ACM), will auto set VRB is "Off". 4.
Page 27
Mode - Standard Picture Language English Color OSD Timeout Audio Transparency Off Refresh Rate Num Gaming Off OSD Lock Off System Move Enter Press the MENU key to open the OSD. Toggle the joystick to the up or down to select OSD from the OSD.Then toggle to the right to navigate to the element you wish to adjust and press the joystick to enter it.
Page 28
System Mode - Standard Picture HDMI Input Color Auto Source Audio DP Format DP 1.2 Gaming Wide Mode Full PIP/PBP Hot Key Assignment System DDC/CI HDMI Black Level Normal Move Enter Quick Start Mode Mode - Standard Picture Quick Start Mode Off...
Page 29
X: Does not support PIP/PBP function in this input combination Hot Key Assigment: Select the function of shortcut key 1(Modes, Volume, Brightness, Gamma, Contrast, Blue Light, Over Drive, PIP/PBP)) and shortcut keys 2 (Modes, Volume, Brightness, Gamma, Contrast, Blue Light, Over Drive, PIP/PBP)). 10.
Check if the computer system is switched on and in power saving/standby mode. If OSD Lock is On, the LED status set Amber. Note: Acer monitor is purposed for video and visual display of information obtained from electronic devices. Regulatory Compliance...