Table of Contents
Advertisement
Color
Adjust the tint of the screen.
― This menu is not available when
Picture Mode
― This menu is not available when
Eye Saver Mode
― This menu is not available when
PBP
is enabled.
•
Red: Adjust the red saturation level. Values closer to 100 mean greater intensity for the color.
•
Green: Adjust the green saturation level. Values closer to 100 mean greater intensity for the color.
•
Blue: Adjust the blue saturation level. Values closer to 100 mean greater intensity for the color.
•
Color
Tone: Select a color tone that best suits your viewing needs.
‒
Cool
2: Set the color temperature to be cooler than
‒
Cool
1: Set the color temperature to be cooler than
‒ Normal: Display the standard color tone.
‒
Warm
1: Set the color temperature to be warmer than
‒
Warm
2: Set the color temperature to be warmer than
‒ Custom: Customize the color tone.
― When the external input is connected through HDMI/DP and
color temperature settings (Cool, Normal,
•
Gamma: Adjust the middle level of luminance.
‒
Mode1
/
Mode2
/
Mode3
is set to
Cinema
or
Dynamic Contrast
mode.
is enabled.
Cool
1.
Normal
mode.
Normal
mode.
Warm
1.
PC/AV Mode
is set to AV,
Color Tone
Warm
and Custom).
HDMI Black Level
If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/
color degradation, black level, etc.) may occur, depending on the connected source device. In such case,
HDMI Black Level
can be used to adjust the image quality.
― This function is only available in
•
Normal: Select this mode when there is no contrast ratio degradation.
•
Low: Select this mode to reduce the black level and increase the white level when there is a contrast
ratio degradation.
―
HDMI Black Level
may not be compatible with some source devices.
― The
HDMI Black Level
feature is only activated at a certain
― This menu is not available when
Eye Saver Mode
Set to an optimum picture quality suitable for eye relaxation.
has four
TÜV Rheinland "Low Blue Light Content" is a certification for products which meet requirements for
lower blue light levels. When
decrease, and it will provide an optimum picture quality suitable for eye relaxation. At the same time, the
blue light level is lower than in the default settings, and it was tested by TÜV Rheinland and certified as
it met the requirements of TÜV Rheinland "Low Blue Light Content" standards.
HDMI
mode.
AV
resolution, such as 720P and 1080P.
PBP
is enabled.
Eye Saver Mode
is 'On', the blue light that wavelength is around 400nm will
36
Advertisement
Table of Contents
