Changing Brightness, Contrast And Sharpness Settings; Changing Eye Saver Mode Settings; Changing The Volume Setting - Samsung LC49RG90 User Manual

Changing Brightness, Contrast and Sharpness settings

You can adjust Brightness, Contrast or Sharpness
displayed.
Sharpness
Brightness
Contrast
― The displayed image may differ depending on the model.
― The default brightness can vary depending on the region.
Brightness
― This menu is not available when
Eye Saver Mode
― This menu is not available when
Picture Mode
Contrast
― This menu is not available when
Picture Mode
Sharpness
― This menu is not available when
Picture Mode
― This menu is not available when
PBP is enabled.

Changing Eye Saver Mode settings

You can adjust Eye Saver Mode by moving the JOG button down, if no OSD menu is displayed.
Eye Saver Mode : On
― The displayed image may differ depending on the model.
by moving the JOG button up, if no OSD menu is
100
is enabled.
is set to Dynamic Contrast mode.
is set to Cinema or Dynamic Contrast mode.
is set to Cinema or Dynamic Contrast mode.

Changing the Volume setting

You can adjust Volume by moving the JOG button left or right, if no OSD menu is displayed.
Volume
― The displayed image may differ depending on the model.
― If the audio quality of a connected input device is poor, the Auto Mute function on the product may mute the
sound or cause choppy audio when applying the headphones or speakers. Set the input volume for the input
device to at least 20% and control the volume using the volume control (JOG button LEFT/RIGHT) on the
product.
― What is Auto Mute?
The function mutes the audio to improve sound effect when there is sound noise or when the input signal
is weak, usually due to a problem with the volume of an input device.
― To activate the
Mute function, access the Volume
down.
To deactivate the Mute function, access the
50
Mute
control screen, then use the JOG button to move the focus
Volume control screen, then increase or decrease the Volume.
12