Using The Headset; Headset Functions; Charging The Battery; Turning The Headset On Or Off - RocketFish TRFQX5 User Manual

Noise cancelling wireless headset
Table of Contents

Advertisement

Using the headset

Headset functions

Headset function
Voice dial
Redial
Answer a call
End (cancel) a call
Reject a call
Transfer a call between connected
devices
Mute or unmute
Adjust the earpiece volume
Erase all pairing information
Turn the indicator on or off
Check the battery status

Charging the battery

Before using the headset, you must charge the battery for
approximately two hours. When the battery is fully charged, it
provides up to 5 hours of talk time or up to 200 hours of standby
time.
To charge the battery:
• Connect the charger to the headset and to an power outlet. While the
battery is charging the indicator lights red. When the battery is fully
charged, the indicator lights yellow-green.
Note: You may also charge the headset with the USB cable by plugging the cable into
an USB port on your laptop or desktop computer.

Turning the headset on or off

To turn the headset on or off:
To turn on the headset, press and hold the power button for about two
1
seconds. The headset beeps and the indicator blinks yellow-green. (The
first time you turn on the headset, you have to press and hold the power
button for five seconds.)
To turn off the headset, press and hold the power button for about four
2
seconds. The headset beeps and the indicator briefly lights red.
6
Button presses
Press the power/send/end button.
Double-press the power/send/end button.
Press the power/send/end button.
Press and hold the power/send/end button for two
seconds.
Double-press the power/send/end button.
Double-press the power/send/end button while in
a call to transfer call to handset.
Press volume up and volume down buttons at the
same time for about two seconds.
Press volume up or volume down button.
When the headset is turned off, press and hold the
power/send/end and volume up buttons until the
indicator flashes red and yellow-green alternately.
When the headset is connected to a phone, press
and hold the power/send/end and volume up
buttons for four seconds.
Press and hold the power/send/end for two
seconds.
RF-QX5 Noise Cancelling Wireless Headset

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rf-qx5

Table of Contents