Table of Contents
Advertisement
NOTE:
you can use an optional external optical drive (purchased separately) to
create recovery discs, or you can purchase recovery discs for your
computer from the HP Web site. If you use an external optical drive, it
must be connected directly to a USB port on the computer, not to a USB
port on an external device, such as a USB hub.
Guidelines:
●
Purchase high-quality DVD-R, DVD+R, BD-R (writable Blu-ray), or
CD-R discs. DVDs and BDs have a much higher storage capacity
than CDs. If you use CDs, up to 20 discs may be required, whereas
only a few DVDs or BDs are required.
NOTE:
DVD±RW, and BD-RE (rewritable Blu-ray) discs, are not compatible
with the Recovery Manager software.
●
The computer must be connected to AC power during this process.
●
Only one set of recovery discs can be created per computer.
●
Number each disc before inserting it into the optical drive.
●
If necessary, you can exit the program before you have finished
creating the recovery discs. The next time you open Recovery
Manager, you will be prompted to continue the disc creation
process.
To create a set of recovery discs:
1.
Select Start > All Programs > Recovery Manager > Recovery
Disc Creation.
2.
Follow the on-screen instructions.
Performing a system recovery
Recovery Manager software allows you to repair or restore the computer
to its original factory state. Recovery Manager works from recovery discs
or from a dedicated recovery partition (select models only) on the hard
drive.
Note the following when performing a system recovery:
52
Chapter 6 Backup and recovery
If your computer does not include an integrated optical drive,
Read-write discs, such as CD-RW, DVD±RW, double-layer
Advertisement
Table of Contents
