HP EliteBook 6930p Maintenance And Service Manual page 86

Notebook pc
Hide thumbs Also See for EliteBook 6930p:
Table of Contents

Advertisement

2.
Remove the following:
(1) Two round rubber screw covers. Screw covers are available in the Rubber Kit, spare part
number 482966-001.
(2) Two wedge-shaped rubber screw covers. Screw covers are available in the Rubber Kit, spare
part number 482966-001.
(3) Four Torx T8M2.5×7.0 screws that secure the display assembly to the computer.
3.
Turn the computer right-side up, with the front toward you.
4.
Open the computer as far as possible.
5.
Disconnect the display panel cable (1) from the system board.
6.
Disconnect the microphone cable (2) from the system board.
7.
Remove the wireless antenna cables (3) from the clips and routing channels built into the top cover.
8.
Disconnect the webcam cable (1) from the system board.
78
Chapter 4 Removal and replacement procedures

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents