Table of Contents
Advertisement
Installation
en
Installation
Screw on the fixing bracket for the flue duct. ¨
1.
Screw on brackets for the extractor hood hand-tight.
2.
Do not firmly tighten the screws. ©
Screw in the threaded bolt, leaving it protruding out
3.
of the wall by 5–9 mm. ª
16
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Attaching and aligning the appliance
First, remove the protective foil from the back of the
1.
appliance and, following installation, remove the foil
completely.
When attaching the appliance, ensure that it
2.
engages firmly with the brackets. «
Align the appliance horizontally by turning the
3.
brackets. If required, the appliance can be moved to
the right or left. ¬
Firmly tighten the screws for the brackets. When
4.
doing so, hold the brackets securely in place. ®
Firmly tighten the knurled nuts. ¯
5.
Advertisement
Table of Contents
