Table of Contents
Advertisement
1Operating the appliance
T hese instructions apply to several appliance variants.
O p e r a t i n g t h e a p p l i a n c e
It is possible that individual features are described
which do not apply to your appliance.
If your appliance has Home Connect, more functions
are only available in the Home Connect app.
Control panel
Symbol
Explanation
Fan on/off
#
Light on/off/dimming
=
Intensive mode
&
Automatic mode
!
Decrease fan setting/fan run-on
A
|||
Settings area
Increase fan setting
@
Indicator/
Explanation
symbol
Metal grease filter saturation indicator
!
Activated charcoal filter saturation indicator
"
1-3
Fan settings
Intensive mode
2
Fan run-on
x
Automatic mode
!
Home Connect
D
Setting the fan
Switching on
Touch the
#
symbol.
■
The fan starts at setting
Slide your finger across the III settings range to
■
change the fan speed.
Switching off
Touch the
symbol.
#
.
ƒ
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Switch on the extractor hood when you start
Note:
cooking and switch it off again several minutes after you
have finished cooking. This is the most effective way of
removing the kitchen fumes.
Intensive setting
You can use the intensive setting if there is a large
build-up of odours and fumes/vapours.
Switching on
Touch the
symbol or slide your finger to the right
@
across control panel III until
After approx. 6 minutes, the extractor hood
Note:
automatically switches back to fan setting 3.
Switching off
If you would like to stop intensive mode before the
preset time expires, slide your finger to the left across
control panel III to select the fan setting you require.
Lighting
The lighting can be switched on and off independently
of the fan.
Touch the
=
symbol.
Setting the brightness
Press and hold the
symbol until the desired
=
brightness is reached.
Boost function
Switching on
Touch the
symbol.
&
After approximately 20 seconds, the extractor
Note:
hood automatically switches back to the fan setting that
was set beforehand.
Switching off
If you want to end the Boost function before the preset
time expires, touch the
&
Operating the appliance
appears in the display.
2
symbol.
en
7
Advertisement
Table of Contents
