Euro-Pro F1075 Owner's Manual page 3

OPERATING INSTRUCTIONS
Read all the sections of this booklet and follow all the instructions carefully.
Using for the First Time
Warning:
Never attach the magnetic
power cord to the unit before the control
panel is inserted into the unit with heating
element in the oil container. Do not
immerse the control panel, cord or plug in
water.
Note:
This unit should not be used to
boil water.
Prior To First Use, Clean The Unit
Thoroughly
Always let the fryer cool completely for 2
hours before taking it apart for cleaning.
Never carry or move the Deep Fryer with
hot oil inside. Before cleaning, always
make sure the plug is not in the wall
socket.
• All components with the exception of the
electrical parts, can be washed in warm
soap water. Dry thoroughly before use.
• Remove the cover from the unit.
• Press down on the Auto-Lift Button on
the basket handle to raise the basket up
and remove the basket assembly from
the deep fryer. (Fig. 1 & 2)
Fig. 1
Fig. 2
• Lift the control panel up and remove from
the unit. (Fig. 3)
Fig. 3
• Remove the oil container.
• Clean the oil container and the frying
basket with hot water, dishwashing
liquid or other non-poisonous detergent
and non-abrasive sponge.
Caution:
All components must be
completely dried before filling with oil
and using. Special care must be
taken to ensure the washable oil filter
in the lid is completely dry, otherwise
the filter will not function properly and
may lead to steam being trapped
within the fryer during use.
Warning:
Never exceed "MAX" line when
filling the basket with food.
3
OPERATING INSTRUCTIONS
Filling the Oil Container
Never plug in the Deep Fryer before filling
with oil to specified level. Always make
sure control panel is securely in place in
the body and the heating element is
inside the oil in the container before
plugging in.
• Use blended vegetable oil, pure corn oil
or canola oil. Do not use olive oil,
margarine, lard or drippings.
• The oil level must always be maintained
between the minimum and the maximum
levels marked inside the oil container.
Check the oil level before each use. For
best results, keep the oil close to the
maximum level. (Fig. 4)
• Never mix different oils and fats together.
Do not mix old and new oil.
Fig. 4
Using Solid Fat
Warning:
Do Not put solid shortening in
the oil container or the frying basket.
• If using solid vegetable shortening, melt
it first in a separate pan and then very
carefully pour the melted fat into the oil
container.
• Previously used solid vegetable shortening
which has curdled and hardened in the oil
container should be removed from the oil
container and melted in a separate pan
before reusing.
Installing the "Control Panel With
the Heating Element" Into Place
• Hold the control panel with the heating
element in your hand.
• Slide the control panel down making
sure that the control panel is fully
seated into the power junction module.
(Fig. 5)
Important Notice:
The Automatic
Safety Switch ensures that the unit will
not operate unless the Control Panel has
been seated properly into the power
junction module. This is not a defect. This
product is fitted with a safety switch to
prevent the unit from turning on
accidentally.
Heating Element
Control Panel
Fig. 5
Power Junction
Module
4