Wall-Mount Your Router - NETGEAR Nighthawk AX6 AX5200 User Manual

Nighthawk AX6 6-Stream AX5200 WiFi Router

Wall-Mount Your Router

You can wall-mount your router using the wall-mounting holes on the bottom of your
router.
Note: We recommend using M3 x 20 mm screws.
Figure 6. Bottom of the router
To wall-mount your router:
1. Drill holes in the wall where you want to wall-mount your router.
2. Insert wall anchors in the holes.
3. Insert screws into the wall anchors, leaving 3/16 inch (0.5 cm) of each screw exposed.
4. Align the router's wall-mounting holes with the screws and mount your router.
Hardware Setup 15 User Manual