HP Compaq Presario,Presario V5000 Maintenance And Service Manual page 155

4. Turn the system board right-side up with the expansion port 2
docking connector toward you.
5. Disconnect the fan cable 1 from the system board.
6. Remove the following screws:
2 One silver Phillips PM2.5×4.0 screw that secures the
3 Two slotted M1.5×9.0 screws on each side of the
4 Two Phillips PM3.0×6.0 screws on each side of the
Removing the Fan Assembly Screws, Part 2
Maintenance and Service Guide
expansion port 2 bracket and fan assembly to the system
board
expansion port 2 connector that secure the expansion port
bracket and fan assembly to the system board
external monitor connector that secure the fan assembly
to the system board
Removal and Replacement Procedures
5–71