Hp Mobile Remote Control (Expresscard Version) Component Functions; Troubleshooting The Remote Control - HP Compaq Presario,Presario V5000 User Manual

Hp compaq presario,presario v5000: user guide
Hide thumbs Also See for Compaq Presario,Presario V5000:
Table of Contents

Advertisement

HP Mobile Remote Control (ExpressCard version) component functions

The infrared lens on the remote control links the remote control to the computer. The link requires a
line-of-sight path between the infrared lens on the remote control and the infrared lens on the
computer.
Things to remember:
The HP Mobile Remote Control operates within Microsoft® Windows®, QuickPlay (select
computer models only), and InterVideo Home Theater software (select computer models only).
Each button responds according to which application is active.
NOTE
information.
NOTE
Depending on your computer model, the QuickPlay User Guide is available either on CD
or through the Help and Support Center.
Some remote control buttons perform the same functions as computer buttons. For example,
the DVD button on the remote control and the DVD button on the computer have the same
functions and can be used interchangeably.
Some remote control buttons perform the same functions as computer hotkeys. Refer to the
computer user guide for information on supported hotkeys.
Other remote control buttons provide functions that are not duplicated by computer buttons or
preset key combinations.

Troubleshooting the remote control

Refer to the following table for help in troubleshooting remote control problems.
Problem
My remote control is not working.
My remote control will not fit into the
slot for storage.
I cannot remove the remote control
from the slot.
ENWW
Refer to the InterVideo Home Theater on-screen help for remote control
For information on using QuickPlay, refer to the QuickPlay User Guide.
Possible solution
Be sure you have a clear line of sight from the remote control
to the IR port on the computer or expansion product.
Be sure that you are within range of the IR port on the
computer or expansion product.
Be sure the battery is properly installed and has a charge.
Replace the battery if necessary.
Be sure you are using the remote control with a supported
computer or expansion product.
Be sure you are inserting the remote control into the proper slot on
the computer. A PC Card remote control must be inserted into the
PC Card slot and an ExpressCard remote control must be inserted
into the ExpressCard slot.
Depending on your remote control model, refer to the removal
instructions in either
or
"Storing the remote control in the ExpressCard
"Storing the remote control in the PC Card
slot"
slot."
Multimedia Hardware
81

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents