Table of Contents
Advertisement
Installing and connecting the condensate drain hose to indoor unit
Drain hose Extension
drain hose
6. Pass the drain hose under the refrigerant pipe, keeping the drain hose tight.
7. Pass the drain hose through the hole in the wall. Check if it slants
downwards as seen in the picture.
8. Using natural drainage method, check the drainage is normal.
refer to page 53 for further details.
Inadequate installation may cause condensate water leakage.
furniture or floors.
Drain hose connection must be easy accessible and serviceable.
Changing drain connection
Change the direction only when it is necessary.
1. Detach the rubber cap with the pliers.
2. Detach the drain hose by pulling it and turning to the right.
3. Insert the drain hose by fixing it with the screw into the groove of the drain
hose and the outlet of the drain pan.
4. Attach the rubber cap with a screwdriver by turning it to the left until it
fixes to the end of the groove.
5. Check for leakage on both side of the drain outlet.
Pour the water in direction of arrow.
Make sure that the water does not overflow onto the electrical part.
1.57~1.77 inch
(40~45
mm)
Extension
Drain hose
drain hose
Direction of condensate flow
English-48
0.79inch
0.79inch
(20mm)
(20mm)
or more
or more
Foam Insulation
Vinyl Tape
Shield
Drain hose
Extension drain hose
Screw
Drain hose
Screw hole
Drain pan outlet
Rubber cap
Advertisement
Table of Contents
