Storing Fm/Am Preset; Frequency - Hyundai AVN-700MDA User Manual

PART 2 AUDIO SYSTEM
(b) S e l e c t i n g a B r o a d c a s t f r e q u e n c y
through SEEK
∨SEEK TRACK∧
Press the or
control panel for less than 0.8 second.
Once the SEEK function is operating (SEEK
indicator blinking), the next or previous
broadcast frequency with superior reception
will be searched automatically.
INFORMATION
∨SEEK TRACK∧
P ress the or
● 
control panel or steering wheel remote con-
troller for more than 0.8 second to quickly
move to the nearest desired frequency.
Once the button is released, the next fre-
quency with superior reception will be
searched automatically.
I f the SEEK function is operating, pressing
● 
∨SEEK TRACK∧
the or keys on the con-
trol panel again will terminate SEEK opera-
tion and select the current frequency.
2-4
AUDIO SYSTEM
Voice Command
1. Press the
keys on the remote controller.
2. After the beep sound, say a command.
"Seek Up"
"Seek Down"
(c) Selecting a broadcast frequency through
manual search
∨TUNE∧
Press the
keys on the

frequency.

Each click on the
or decrease the frequency by 1 step (FM: 0.2
MHz, AM: 10 kHz).

Storing FM/AM preset

There are 2 ways to store preset frequencies -
(a) storing manually and (b) auto store.
(a) Storing manually
1. Select the desired frequency.
[Selecting FM/AM broadcast frequency],
page 2-3.
key on the steering wheel
key to search for desired
∨TUNE∧
key will increase
2. Press the preset button to store for over 0.8
second. The frequency will become stored
along with a beep sound.
INFORMATION
Six preset frequencies each for FM1/ FM2/AM
modes can be stored using the above instruc-
tions.
(b) Auto store
After selecting the desired band, press the
Auto store button. The 6 frequencies with the
most superior reception will be stored as pre-
set buttons in corresponding order.
INFORMATION
Auto store
If the button is pressed again
while operating Auto Store, then the Auto
Store operation will be terminated and the
previously played frequency will be restored.