HP Compaq Presario,Presario C300 Maintenance And Service Manual page 133

✎
The wireless antenna transceivers and cables are available in
the Wireless Antenna Kit, spare part number 410118-001.
26. If it is necessary to replace the wireless antenna transceivers
and cables, remove the Phillips PM2.5×5.0 screws 1 that
secure the wireless antenna transceivers to the
display enclosure.
27. Release the retention tabs 2 built into the display enclosure
lining that secure the wireless antenna cables to the
display enclosure.
28. Detach the wireless antenna transceivers 3 from the
display enclosure.
29. Remove the wireless antenna transceivers and cables 4.
Removing the Wireless Antenna Transceivers and Cables
Reverse the above procedure to reassemble and install the
display assembly.
Maintenance and Service Guide
Removal and Replacement Procedures
5–39