Denon AVR-X3300W Manual page 6


Rod antennas for Bluetooth/wireless LAN
Stand this antenna upright when connecting to a network via wireless
LAN, or when connecting to a handheld device via Bluetooth.
The antenna clip can be removed from the rear panel.
A Rotate the antenna clip 90 degrees to the left.
B Pull the antenna clip out towards yourself.
• The antenna clip is needed when transporting this unit. Keep it in a safe place.
• Attach the antenna clip by following the steps for removing it in reverse.
Rear Panel (1 of 3)
DISPLAY 2

REMOTE CONTROL jacks
Used to connect infrared receivers/transmitters in order to operate this
unit and external devices from a different room.

RS-232C connector
Used to connect home automation controller devices fitted with RS-232C
connectors. Consult the owner's manual of the home automation
controller for more information about serial control of this unit.
Perform the operation below beforehand.
1. Turn on the power of this unit.
2. Turn off the power of this unit from the external controller.
3. Check that the unit is in the standby mode.

Video connectors (VIDEO)
Used to connect devices equipped with video connectors.
• "Connecting a set-top box
HOME
REAR PANEL 2