HP Compaq Presario,Presario 1500 Maintenance And Service Manual page 133

6. Remove the display video cable 1 from the routing channel
in the heat spreader (Figure 5-21).
7. Lift the right side of the heat spreader until it rests at
an angle 2 .
8. Slide the heat spreader to the right at an angle 3 and remove
the heat spreader from the base enclosure.
Figure 5-21. Removing the Heat Spreader
Reverse the preceding procedures to install the heat spreader.
Maintenance and Service Guide
Removal and Replacement Procedures
5–27