LG FWV696 Series Owner's Manual page 43

global_main.book.book Page 43 Wednesday, September 2, 2020 4:40 PM
2
Select and touch the Front Load
Washer in the application.
3
Press the Power button on the
control panel.
4
Press and hold Wi-Fi button for 3
seconds on the control panel.
• The Wi-Fi LED blinks during the
connection process.
Using the Appliance Remotely
Remote Start
Use a smartphone to control your
appliance remotely. You can also
monitor your cycle operation so you
know how much time is left in the cycle.
Using this function
1
Put the clothes into the drum.
• If desired, add bleach or fabric
softener to the appropriate areas of
the dispenser.
2
Press the Power button.
3
Press and hold Remote Start button
for 3 seconds to enable the remote
control function.
4
Start a cycle from the LG ThinQ
application on your smartphone.
NOTE
• Once this function is enabled, you can
only start a cycle from the LG ThinQ
smartphone application. If the cycle is
not started, the appliance will wait to
start the cycle until it is turned off
SMART FUNCTIONS
remotely from the application or this
function is disabled.
• If the door has been opened, you can
not start a cycle remotely.
Disable this function manually
When this function is activated, press
and hold the Remote Start button for 3
seconds.
Deactivating Network
Connection
On your smartphone, disconnect to your
home Wi-Fi network.
1
Run the LG ThinQ application.
2
Select and touch the Front Load
Washer in the application.
3
Select and touch the Delete Product
on the settings menu to disconnect it.
Standby Power Consumption
Standby power consumption
Network standby power
consumption
The period of time after which
the power management
function, or a similar function,
switches the equipment
automatically into standby
and/or off mode and/or the
condition providing
networked standby
43
0.5 W
2.0 W
20
minu
tes