Table of Contents
Advertisement
Quick Links
INSTALLATION AND OPERATION MANUAL
FVT/FVR40A4(M,S)1
4-CHANNEL 10-BIT DIGITALLY ENCODED VIDEO +
4-CHANNEL 24-BIT DIGITALLY ENCODED AUDIO MULTIPLEXER
The ComNet™ FVT/FVR40A4 series video/audio multiplexer utilizes 10-bit
video encoding for true EIA/TIA RS-250C Short-Haul broadcast quality
transmission, and 24-bit encoding at a 96 Khz sampling rate for the highest
possible audio fidelity. Digitally encoded transmission ensures that the video
and audio performance remain completely unaffected up to the maximum
usable optical transmission distance or optical path loss. These environmentally
hardened units provide the transmission of four independent simplex video
and four independent simplex line-level audio channels over one multimode or
single mode optical fiber. The FVT/FVR40A4 series is completely transparent
to and universally compatible with any NTSC, PAL, or SECAM camera system.
Plug-and-play design ensures ease of installation, and no electrical or optical
adjustments are ever required. Bi-color (Red/Green) LED indicators confirm
power and link operating status. See Figure 6 on Page 3 for LED indicator
explanations.
Packaged in the exclusive ComNet ComFit housing, these units may be directly
plugged into the ComNet Rack (Part C1) or operated as a standalone module
powered by the 9 Volt DC Plug-in Power Supply also provided with the module,
or may be DIN-rail mounted by the addition of the ComNet model DINBKT1
adaptor plate. See Figure A on Page 4 for mounting instructions.
See Figures 1 – 6 for complete installation details.
INS_FVT/FVR40A4_REV–
09/23/10
PAGE 1
Advertisement
Table of Contents
Related Manuals for Comnet FVR40A41
Summary of Contents for Comnet FVR40A41
- Page 1 Packaged in the exclusive ComNet ComFit housing, these units may be directly plugged into the ComNet Rack (Part C1) or operated as a standalone module powered by the 9 Volt DC Plug-in Power Supply also provided with the module, or may be DIN-rail mounted by the addition of the ComNet model DINBKT1 adaptor plate.
- Page 2 INSTALLATION AND OPERATION MANUAL FVT/FVR40A4(M,S)1 FIGURE 1 – FVT/FVR40A4(M,S)1 TRANSMITTER AND RECEIVER MULTIMODE OR SINGLE MODE OPTICAL FIBER BLACK BLACK WITH WHITE STRIPE Power Supply: Surface Mount: 8–15 VDC @ 3W Rack Mount: From Rack FIGURE 2 – FVT40A4C1 TRANSMITTER FIGURE 3 –...
- Page 3 INSTALLATION AND OPERATION MANUAL FVT/FVR40A4(M,S)1 FIGURE 4 – AUDIO WIRING Differential Input/Output Audio Source – – Speaker – – Single-Ended Input/Output Audio Source – Speaker – FIGURE 6 – LED INDICATORS VIDEO 1–4 AUDIO 1–4 LINK POWER GREEN An active video signal is (Solid or Blinking) An active Communication link has been Unit powered up...
- Page 4 8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | INFO-EUROPE@COMNET.NET INS_FVT/FVR40A4_REV– 09/23/10 © 2011 Communications Networks Corporation. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks, LLC. PAGE 4...
Need help?
Do you have a question about the FVR40A41 and is the answer not in the manual?
Questions and answers