Page 1
These units may be directly plugged into the ComNet Rack (Part C1) or they can operate as standalone modules. See Figure A on Page 4 for mounting instructions.
Page 2
INSTALLATION AND OPERATION MANUAL FVT/FVR81 FIGURE 1 – FVT/FVR81 TRANSMITTER AND RECEIVER MULTIMODE OR SINGLE MODE OPTICAL FIBER BLACK BLACK WITH WHITE STRIPE FIGURE 2 – FVT81 TRANSMITTER FIGURE 3 – FVR81 RECEIVER FRONT PANEL REAR PANEL FRONT PANEL REAR PANEL NOTE: Remove Electrical Connector for Rack Mount Units INS_FVT/FVR81_REV–...
Page 3
INSTALLATION AND OPERATION MANUAL FVT/FVR81 FIGURE 4 – LED INDICATORS LINK VIDEO (1 – 8) POWER GREEN Communication link has An active video signal is Unit powered up been established over present on the BNC optical fiber connector. Communication link has No video signal –...
Need help?
Do you have a question about the Value FVR81 Series and is the answer not in the manual?
Questions and answers