Hotpoint Aquarius+ VTD65 Instructions For Installation And Use Manual page 8

6kg vented dryer
Hide thumbs Also See for Aquarius+ VTD65:
Table of Contents

Advertisement

Start and Programmes
Programmes
GB
! If the On/Off light is not lit; Press the ON/OFF button
Programme What it does...
Dries your clothes on
1
Cottons
High heat setting, ready
Ready to Iron
for ironing.
2
Dries your clothes on
Cottons
High heat setting, ready
Hanger Dry
for hanging.
Dries your clothes on High
3
Cottons
heat setting, ready for
Cupboard Dry
putting away.
4
Dries your clothes on
Synthetics
High heat setting, ready
Ready to Iron
for ironing.
5
Dries your clothes on
Synthetics
High heat setting, ready
Hanger Dry
for hanging.
6
Dries your clothes on High
Synthetics
heat setting, ready for
Cupboard Dry
putting away.
Dries your clothes on Low
Delicates
heat setting, ready to be
worn.
(e.g. Acrylics)
Dries your Woollen clothes,
Wool
(see previous page).
Airs your clothes with
AIRING
cool air, use also to cool
warm clothes.
Brief programme
Easy Iron
(approximately 10 minutes)
that softens fibres of
clothing that is ready for
ironing.
Timed Drying
Dries wet clothing that you
wish to dry on low heat or
(120, 90, 60 or
30 minutes)
small loads (less than 1kg).
Can be used with high heat
option if you prefer to use
a timed programme.
Brief programme
(approximately 10 minutes)
Cool Tumble
that cools fibres of clothing.
6
All manuals and user guides at all-guides.com
How to set it...
1. Position the PROGRAMME knob on 1.
2. Select any Options, if required.
3. Press the START button.
1. Position the PROGRAMME knob on 2.
2. Select any Options, if required.
3. Press the START button.
1. Position the PROGRAMME knob on 3.
2. Select any Options, if required.
3. Press the START button.
1. Position the PROGRAMME knob on 4.
2. Select any Options, if required.
3. Press the START button.
1. Position the PROGRAMME knob on 5.
2. Select any Options, if required.
3. Press the START button.
1. Position the PROGRAMME knob on 6.
2. Select any Options, if required.
3. Press the START button.
1. Position the PROGRAMME knob on
2. Select any Options, if required.
3. Press the START button.
1. Position the PROGRAMME knob on
2. Select any Options, if required.
3. Press the START button.
1. Position the PROGRAMME knob on
2. Select any Options, if required.
3. Press the START button.
1. Position the PROGRAMME knob on
2. Select any Options, if required.
3. Press the START button.
1. Position the PROGRAMME knob on the
desired time: 120, 90, 60 or 30.
2. Select any Options, if required.
3. Press the START button.
1. Position the PROGRAMME knob on
2. Select any Options, if required.
3. Press the START button.
and then select programme.
Note:
Options available:
Alarm, Delayed start,Pre
Creasecare, Post Creasecare.
Options available:
Alarm, Delayed start,Pre
Creasecare, Post Creasecare.
Options available:
Alarm, Delayed start,Pre
Creasecare, Post Creasecare.
Options available:
Alarm, Delayed start,Pre
Creasecare, Post Creasecare.
Options available:
Alarm, Delayed start,Pre
Creasecare, Post Creasecare.
Options available:
Alarm, Delayed start,Pre
Creasecare, Post Creasecare.
Options available:
.
Alarm, Delayed start, Pre
Creasecare, Post Creasecare.
Options available:
.
Alarm
.
Options available:
Alarm
! This is not a drying
.
programme (see previous
page).
Options available:
Alarm
Options available:
Alarm, High Heat, Delayed
Start, Pre Creasecare, Post
Creasecare.
Consult suggested drying
times (see Laundry).
The last 10 minutes of these
programmes is the Cool
Tumble.
.
Options available:
Alarm

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aquarius+ vtd60

Table of Contents