Selecting From The File Menu - HP Compaq NC4010 Maintenance And Service Manual

4. To confirm the restoration, press
5. Select File > Save changes and exit, and then follow the
instructions on the screen.
When the computer restarts, the factory settings are restored, and
any identification information you have entered is saved.

Selecting from the File Menu

Select
System Information
Save to floppy
Restore from floppy
Restore defaults
Ignore changes and exit
Save changes and exit
Maintenance and Service Guide
Table 2-1
File Menu
To Do This
■ View identification information about the
notebook and any battery packs in the system.
■ View specification information about the
processor, memory and cache size, video
revision, keyboard controller version, and
system ROM.
Save system configuration settings to a diskette.
Restore system configuration settings from a
diskette.
Replace configuration settings in Computer Setup
with factory default settings. (Identification
information is retained.)
Cancel changes entered during the current
session. Then exit and restart the notebook.
Save changes entered during the current session.
Then exit and restart the notebook. The changes
you save are in effect when the notebook restarts.
Troubleshooting
.
f10
2–3