CBC GANZ Digimaster Series Instruction Manual page 45

SYSTEM SETUP
EVENT / SENSOR - E-MAIL NOTIFICATION
This menu will determine the behavior and actions that will send an e-mail notification to a remote user.
Behavior settings
NOTIFICATION: E-mail notification can be enabled or disabled.
SETUP CHANGE: Determines whether a change to the system configuration would cause an e-mail to be sent.
HDD EVENT: Determine whether a hard drive event would cause an e-mail to be sent.
BOOTING EVENT: Determines whether a booting event would cause an e-mail to be sent.
Action settings
ALARM: Determine whether alarm inputs will cause an e-mail to be sent.
VIDEO LOSS: Determine whether video loss on any of the selected channels will cause an e-mail to be sent.
MOTION: Determine whether motion detection on any of the selected channels will cause an e-mail to be sent.
FREQUENCY: Minimum period of time between sending e-mail notifications (max. 60 minutes).
NOTE: E-mail Notification settings must also be configured within the 'MAIL' and 'USER MANAGEMENT' menus.
All manuals and user guides at all-guides.com
Click on the EMAIL NOTIFICATION menu, and click on a field.
Use the
45
button to modify the value.