CBC GANZ Digimaster Series Instruction Manual page 33

All manuals and user guides at all-guides.com
SYSTEM SETUP
DISPLAY – SPOT OUT
Click on the 'SPOT-OUT' menu.
Each DVR has up to 1SPOT MONITOR OUTPUT.
Spot monitor displays a full screen sequence of particular channels, depending on the settings within this menu.
For spot monitor, the operator can decide which channels are to be displayed in the sequence.
By default, Spot Monitor output is set to run a sequence of all 16 channels.
SPOT TITLE: Input the title of each spot monitor.
ACTIVATION: Toggle each spot monitor ON/OFF.
- Click 'MODIFY'. (Below is default setup)
- To modify the current display, double-click the display. Then 'Spot Sequence Setup" window will appear.
Setup method is similar to the Sequence setup performed earlier (can only use single or quad mode for spot output).
- To add an additional display, click 'ADD'.
33