Table of Contents
Advertisement
All manuals and user guides at all-guides.com
SYSTEM SETUP
NETWORK
From the 'System Setup' menu, click on the 'NETWORK' menu.
NETWORK- IP SETUP
Click on the 'IP SETUP' menu.
DHCP: When enabled, the DVR will obtain an IP address automatically from a router or DHCP server, upon reboot.
WEB SERVICE: When enabled, allows remote connections using Internet Explorer or other compatible web browsers.
IP ADDRESS: If DHCP is not being used, the IP address can be manually set by the user.
GATEWAY: If DHCP is not being used, the gateway IP address can be manually set by the user.
SUBNET MASK: If DHCP is not being used, the subnet mask can be manually set by the user.
1ST DNS SERVER: If DHCP is not being used, the first DNS server can be manually set by the user.
2ND DNS SERVER: If DHCP is not being used, the second DNS server can be manually set by the user.
RTSP SERVICE PORT: If the connected Router supports UPnP (Universal Plug and Play) functionality, when you click
'AUTO PORT', the port forwarding is automatically configured.
WEB SERVER PORT: The port number that the DVR uses to support remote connection from Internet Explorer
or other compatible web browsers.
ALIAS: When you enter the DDNS HOST NAME within DDNS setup (see next page), you can see the DDNS
Information, for example: http://1234.dvrlink.net:8080
MAX TX SPEED: Specifies the maximum bandwidth that the DVR can use during a remote connection.
40
Advertisement
Table of Contents
