Fan - HP Compaq 6520s Maintenance And Service Manual

Fan

Description
Fan
Before removing the fan, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
Optical drive (see
b.
Keyboard (see
c.
Switch cover (see
d.
Speaker (see
e.
Display lid switch module (see
f.
Display assembly (see
g.
Top cover (see
h.
System board (see
i.
Remove the fan:
Remove the Phillips PM2.5×7.0 screw (1) that secures the fan to the base enclosure.
1.
Loosen the Phillips PM2.5×7.0 screw (2) that secures the fan to the base enclosure.
2.
Battery on page 34).
Hard drive on page
Optical drive on page
Keyboard on page 43)
Switch cover on page
Speaker on page 47)
Display lid switch module on page
Display assembly on page
Top cover on page 54)
System board on page
35)
41)
45)
49)
62)
Component replacement procedures
Spare part number
456604-001
48)
65