Pyrolytic: Automatic Main Oven Cleaning - Smeg DOSP6390X Manual

Removing racks/trays support frames
Removing the guide frames enables the
sides to be cleaned more easily. This
operation should be performed each time
the automatic cleaning cycle is used (on
some models only).
To remove the guide frames: Pull the frame
towards the inside of the oven to unhook it
from its groove A, then slide it out of the
seats B at the back.
When cleaning is complete, repeat the
above procedures to put the guide frames
back in.
Cleaning and maintenance
4.9 Pyrolytic: automatic main oven
cleaning
Pyrolytic is an automatic high-
temperature cleaning procedure
which causes dirt to dissolve.
Thanks to this process, it is possible
to clean the inside of the oven very
easily.
If the auxiliary oven is on or is still
hot after cooking, it will not be
possible to start an automatic
cleaning cycle of the main oven.
If the auxiliary oven is turned on
during the pyrolytic cycle, the main
oven will stop the automatic
cleaning cycle.
Improper use
Risk of damage to surfaces
• Remove any food residues or large spills
from previous cooking operations from
the inside of the oven.
• Switch off the burners or electric hot
plates of the hob installed above the
oven.
67