Using Computer Setup; Navigating And Selecting In Computer Setup - HP Compaq 2533t Administrator's Reference Manual

Using Computer Setup

Navigating and selecting in Computer Setup

The information and settings in Computer Setup are accessed from the File, Security, Diagnostics, and
System Configuration menus.
1. Open Computer Setup by turning on or restarting the computer, and then pressing
"F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen.
Because Computer Setup is not Windows-based, it does not support the TouchPad. Navigation
and selection are by keystroke:
●
To choose a menu or a menu item, use the arrow keys.
●
To select an item, press enter.
●
To close open dialog boxes and return to the main Computer Setup screen, press esc.
●
To view navigation information, press f1.
●
To change the language, press f2.
2. Select the File, Security, Diagnostics, or System Configuration menu.
3. To exit Computer Setup, choose one of the following methods:
●
To exit Computer Setup without saving your changes, use the arrow keys to select File >
Ignore changes and exit. Then follow the on-screen instructions.
●
To save your changes and exit Computer Setup, use the arrow keys to select File > Save
changes and exit. Then follow the on-screen instructions.
Your changes go into effect when the computer restarts.
92 Chapter 15 Computer Setup
f10 while the