Preparing For Connection; Connecting To Computer - Canon PIXMA G4210 Series Getting Started

6. Preparing for Connection

1
Press the OK button.
Preparing the ink starts.
This takes about 5 to 6 minutes. Proceed to the next
step.
2
Check that the following screen appears.
From here on, proceed to a step according to how you use
the printer.
• To use the printer by connecting only to a computer
or both to a computer and smartphone
"7-A. Connecting to Computer"
• To use the printer by connecting only to a
smartphone
"7-B. Connecting to Smartphone" on page 6
7-A. Connecting to Computer
You need a connection setup for each computer. Proceed with the setup from step 1 for each computer.
1
Start the setup file for either method
Downloading from the Internet
a Open a web browser (
b Input the following URL and access the Canon
website.
c Select Set Up.
d Input the model name of your printer and click OK.
You can select a model name from the list.
4
or method
etc.) on your computer.
To use the printer without connecting to
a computer or smartphone
a Press the Stop button on the printer.
b In the connection method selection screen, use the
[ and ] buttons to select Do not connect, and
then press the OK button.
c Use the [ and ] buttons to select Yes, and then
press the OK button.
d Wait until the following screen appears.
The setup is now complete.
.
e Click Setup.
The procedures for Windows and macOS are shown
below. If you are using a computer with an OS other
than Windows or macOS, such as a Chrome OS, do
the setup according to the on-screen instructions.
f Click Download and download the setup file.
g Execute the downloaded file.
Proceed to step
continue.
Windows macOS
on the next page to