Access Control - Advantek Networks AWN-AP-54MR User Manual

All manuals and user guides at all-guides.com
Group Key Life Time
Enable Pre-
Authentication
Authentication RADIUS
Server
Apply Change
Reset

Access Control

When Enable Wireless Access Control is checked, only those clients whose
wireless MAC addresses listed in the access control list can access this Access
Point. If the list contains no entries with this function being enabled, then no
clients will be able to access this Access Point.
Authentication will be activated.
same password is used on client's end.
There are two formats for choice to set the Pre-
shared key, i.e. Passphrase and Hex. If Hex is
selected, users will have to enter a 64 characters
string. For easier configuration, the Passphrase (at
least 8 characters) format is recommended.
Enter the number of seconds that will elapse before
the group key change automatically. The default is
86400 seconds.
The two most important features beyond WPA to
become standardized through 802.11i/WPA2 are:
pre-authentication, which enables secure fast
roaming without noticeable signal latency.
Preauthentication provides a way to establish a
PMK security association before a client associates.
The advantage is that the client reduces the time
that it's disconnected to the network.
Port: Enter the RADIUS Server's port number
provided by your ISP. The default is 1812.
IP Address: Enter the RADIUS Server's IP Address
provided by your ISP.
Password: Enter the password that the AP shares
with the RADIUS Server.
Press to save the new settings on the screen.
Press to discard the data you have entered since
last time you press Apply Change.
21
Make sure the