Table of Contents
Advertisement
All manuals and user guides at all-guides.com
CONFIGURATION
Login
1.
Start your computer. Connect an Ethernet cable between your computer
and the Wireless Access Point.
2.
Make sure your wired station is set to the same subnet as the Wireless
Access Point, i.e. 192.168.1.254
3.
Start your WEB browser. In the Address box, enter the following:
The configuration menu is divided into four categories: Status, Wireless,
TCP/IP, and Other settings. Click on the desired setup item to expand
the page in the main navigation page. The setup pages covered in this
utility are described below.
No username and password required for the fist login, however, you can
set up a set of password for the future security and username is can't
change, for detailed configuration, please refer to the Password in the
later section of Configuration.
4.
Default username: please key in "admin" on login web page.
HTTP://192.168.1.254
9
Advertisement
Table of Contents
