Table of Contents
Advertisement
All manuals and user guides at all-guides.com
About the Operation Modes
This device provides four operational applications with Access Point, Bridge,
Client (Ad-hoc) and Client (Infrastructure) modes, which are mutually
exclusive.
This device is shipped with configuration that is functional right out of the box. If
you want to change the settings in order to perform more advanced
configuration or even change the mode of operation, you can use the web-
based utility provided by the manufacturer as described in the following
sections.
Access Point Mode
When acting as an access point, this device connects all the stations
(PC/notebook with wireless network adapter) to a wired network. All stations
can have the Internet access if only the Access Point has the Internet
connection.
See the sample application below.
To set the operation mode to Access Point, please go to "Wireless
Settings", in the "Mode" field click the down arrow
WDS Repeater Mode
Refer to the illustration below. While acting as Bridges, AP1 (with Station 1
being associated to) and AP2 (with Station 2 being associated) can
communicate with each other through wireless interface (with WDS). Thus
Station 1 can communicate with Station 2 and both Station 1 and Station 2 are
able to access the Internet if only AP1 or AP2 has the Internet connection.
To set the operation mode to Bridge, please go to "Wireless
Settings", in the "Mode" field click the down arrow
go to "Wireless
WDS Settings" to enable WDS.
Client Mode (Infrastructure)
If set to Client (Infrastructure) mode, this device can work like a wireless station
when it's connected to a computer so that the computer can send packets from
wired end to wireless interface.
to select AP mode.
to select AP mode. And
7
Basic
Basic
Advertisement
Table of Contents
