LG 55LV35A-5B.AUS Easy Setup Manual page 11

How to Join Sets
47LV35A
1
Join other sets using screws for fixing the
VESA wall mount in the same way as above.
Set 4 joined to the rest of the sets
(2 x 2 tiling)
2
After joining the sets, use the tiling guide to
adjust the gap between the sets.
3
Now the 2 x 2 tiling is complete. You can tile in
various combinations, such as 3 x 3.
NOTE
The load applied to each set should be supported by the wall mount plate or the wall using a VESA
y y
wall mount (600 x 400).
The load applied to each set should be supported by the wall mount plate using a VESA wall mount.
y y
(Each set must be firmly mounted to the wall mount plate or the wall.)
You may mount the set without using the tiling guide; this does not affect the performance of the
y y
device.
Loosen the screws on the set to install the tiling guides. (The screws are enclosed with the other
y y
components in the box, including the tiling guides.)
55LV35A
1
Join other sets using screws for fixing the
VESA wall mount in the same way as above.
Set 4 joined to the rest of the sets
(2 x 2 tiling)
2
After joining the sets, use the tiling guide to
adjust the gap between the sets.
3
Now the 2 x 2 tiling is complete. You can tile in
various combinations, such as 3 x 3.
11
TILING DISPLAYS