Table of Contents
Advertisement
AW_DD610_manual_G04_180424.pdf 22 2018-04-24 11:02:59
Troubleshooting
Problem
No sound
No sound from Pads
No click sound
The Pad volume doesn't match the
Song playback volume.
Cannot connect to the computer
C
M
Y
CM
MY
CY
Prompt Messages
CMY
K
Message
REC FUL
FAC SEt
EMP
OK
WAT
22
Possible Cause and Solution
1. Rotate the [VOLUME] knob to be sure that the volume isn't down.
2. To be sure that Local Mode should be set to "ON"
1. To be sure that the pad is connected correctly.
2. To be sure not set the volume of the pad to 0.
1. To be sure the metronome is turned on.
2. To be sure not set the volume of the click to 0.
1. Adjust the song playback volume to match the pad volume.
1. Make sure the USB has correctly connected.
2. Do the connect operation again (Keep the computer on, and then
turn the module on, connect the USB cable).
Meaning
The record data memory is full.
The factory reset of module is complete.
The user song is empty.
The drum kit and utility settings are saved.
The data is loading from flash ROM now, please wait.
Advertisement
Table of Contents
