Disassembly And Assembly Instructions; To Remove Front Plate; To Remove Cabinet - Panasonic WH-SDF09C3E5 Service Manual
Air-to-water heatpump
Hide thumbs
Also See for WH-SDF09C3E5:
- Service manual (146 pages) ,
- Design handbook (132 pages) ,
- Operating instructions manual (92 pages)
Table of Contents
Advertisement
18. Disassembly and Assembly Instructions
High Voltage are generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged sufficiently before proceeding
with repair work. Failure to heed this caution may result in electric shocks.
18.1 To Remove Front Plate
Please follow the steps below for take out front plate. Before removing the front plate of indoor unit, always
switch off all power supply (i.e. indoor unit power supply, heater power supply and boiler tank power supply).
1
Remove the 2 mounting screws which located at bottom of the front plate and 1 mounting screw at the front
of the plate.
2
Gently pull the lower section of the front plate towards you to remove the front plate from left and right hooks.
3
Hold the left edge and right edge of front plate to lift up front plate from hooks.
18.2 To Remove Cabinet
WARNING
130
Hide quick links:
Advertisement
Table of Contents
